MCX2

Like the original Blade mCX, the Blade mCX2 is easy enough for anyone to fly and small enough to fly just about anywhere. The mCX2 has the same coaxial, counter-rotating rotor head design as the current mCX, but it adds an extra shot of excitement with user-selectable swash sensitivity and flashing LED lights that are built right into the body. The pilot can change the control settings to enable this heli to perform at higher speeds than the beginner settings. This helicopter also boasts heading-lock like performance for maximum control. It also boasts more powerful motors and a higher capacity 120mAh battery pack. The mCX2 is the ultimate beginner friendly machine with unsurpassed stability, incredible control, and extreme durability.

With a factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro, and fully-proportional servos come pre-installed. Freedom from frequency restrictions and great control are ensured with the MLP4DSM 4-channel 2.4Ghz Spektrum technology equipped transmitter. The Blade MCX2’s ultra-micro size and weight make it possible to fly this heli anywhere indoors.

It all adds up to more fun than you ever thought possible with a coaxial ultra micro heli, whether you’re a newbie or a pro.

>> Hot Helicopters Radio Control Like This tend to SELL OUT VERY QUICKLY <<
If this is MUST HAVE gift, be sure to order now to avoid disappointment.

Blade MCX2

The Body
The integration of the entire body of the helicopter is a style that comes from the bigger Blade CX2, making the Blade MCX2 look larger during flight, and larger than mCX, though the dimensions of the two are very similar. The body of the Blade MCX2 has two parts, which are the back tail and the front pod of the helicopter. Now, we need not loosen any tiny o-rings, as we used to on the mCX and the S300. This model uses little grommets like Blade mSR. They remain fixed to the body of the helicopter.

The style of MCX2 RTF model thus offers simple removal and access features. If you want, you can also remove the rear of the model and fix a carbon tail fin or boom. This is part number EFLH2428. This transforms the mCX2 to a more dynamic boom and pod configuration.

E-flite has also put a modifiable weight on the optional boom. This helps to maintain the correct center of gravity after the removal of the bulkier work on the back of the body. At the same time, you can also modify the center of gravity in order to change the flight of the helicopter. For instance, you can improve the advancing flight speed by giving the helicopter a subtle nose heavy configuration.

E-flite knows the needs of its customers well. They know that most people whose passion revolves around micro helicopters came into the hobby to have fun. To enhance the feeling of enjoyment, E-flite has added red and green starboard and port navigation LED lights that flash. They have also added a red light at the tail, replicating a navigation beacon that rotates. These lights do nothing for performance. Rather, they use more power and add weight. However, the little details increase the popularity of E-flite in the micro heli industry. The LED lights are already in place in the rear part of the heli’s body. They are a part of the new Blade mCX2. You can plug them in the improved 5-in-1 control board, as it has an additional input to plug in the lights. You can also use your old control board to use the mCX2, but the lights will not work.

Other upgrades comprise of a clear window for the canopy. E-flite has also included new graphics on the rotor blade. The blade, with additional white tips, now displays the “BLADE” trademark, similar to the Blade mSR. This adds to the appeal of the rotors when they are stationary as well as when spinning.

MCX2 RTF

Overall Performance
In this area, the original mCX is definitely inferior to the new Blade mCX2. The new heli has robust coreless motors. These provide a minor power improvement. Since the body integration results in addition of weight, this little power maintains the performance of the helicopter. In addition, there is a large improvement in the power and performance of the Pod and Boom configuration, in comparison to the configuration in the original Blade MCX2 RTF.

The control of these stronger motors is through the new control board, which probably has some modifications in the algorithms for proper motor mixing functions. Similar to other mCX 5-in-1 control board, the new one also has a DSM2 receiver, a functional yaw rate gyro, dual linear servos in charge of controlling the cyclic swash plate movement and ESC circuitry, which controls mixing and power to both the rotor motors.

MCX2 derives its power from its 120-mAh 14C cell of 3.7 volts. This is a Lithium-ion polymer battery. Blade mSR also uses the same battery. Upgrading to the 150-mAh Li-Po battery is also possible. This allows better flight durations and speed.

The user selectable dual position swash plate is another upgrade in the performance of the mCX2. Like others, this too is an improved version of an mSR component. Adjusting the pushrods to the outer most balls of the swash from the inner most ones allows additional angles of cyclic pitch. This makes the cyclic performance livelier, as your confidence and skill with the mCX2 increases.

Modification of the stock mCX swash plates has been going on for a while now. Having realized this, E-flite generated the best solution to increase the speed of the helicopter. If you change the boom and pod configuration to a slightly nose heavy configuration, the mCX2 will have faster flight speed when the helicopter is advancing. You can do this easily using the adjustable weight. This is possible on both, the mSR and the Blade MCX2 RTF.

Blade MCX2 RTF

Read customer review who bought Blade mCX2 RTF.

Fun Heli for a Mature First Timer By BamaChE
I purchased MCX2 as a first time R/C flyer. I have seen others for sale online from China and Malaysia. From reading from some magazines and the net, E-Flight and Horizon are known and trusted names in the R/C world. [...] is one of the places I viewed the Manual and Videos of the Heli actually flying. There is also a strong base for add-ons, replacement parts, batteries and AC adapter for connecting to the charger. I personally purchased 2 extra batteries and the AC adapter with my order and has served me well for about a month. I used to play Tennis, Badminton, Vollyball and have cheap ($28.00) R/C Car I currently drive; So I have good hand-eye coordination and I think this is very important when operating R/C products especially with Helis and other aircraft. Good luck to you as your mileage may vary.

What’s in the box Everything you need to fly your first flight, including the AA batteries for the Transmitter included and the charger included (that accepts the AC adapter). The Heli is completely assembled and is automatically bound to the transmitter. READ THE MANUAL FIRST. Then go through and do your first test flying. I Highly recommend this to a serious hobby enthusiast. Be he/her 8 to 80. I recommend protective eyeware, just in case the rotating blades come into contact with something.

My First Heli By Davod
I’ve had an interest in RC helicopters for a long time, and boy am I glad I bought MCX2 as my first! After reading through the manual, I was flying in no time. It’s incredibly easy to fly and I get better with every flight. I’m really looking forward to “advanced mode” once I’ve mastered the controls. I gave this Blade MCX2 RTF4 stars for durability because although I’ve crashed a few times and it hasn’t broken yet, I feel like there’s a good chance that some parts might fly off in the future. Great product!

Where to Buy Blade mCX2 RTF

You can buy Blade mCX2 RTF from many big retailers offline or online like Amazon, Best Buy, Target, Walmart etc. But which one is the best? We have done work for you, we find the best place to buy Blade mCX2 RTF is at Amazon.com. This giant online retailers give the best price which included FREE Shipping (in US only) for this holiday season.

Amazon.com is a reputable company that stand out in customer services. You will have a piece of mind because not only they will make sure you get the holiday gift on time but they are very actively in updating you the status of your gift delivery. Gift wrapping is also available for just a small additional fee.